74-76 Firebird A/C Compressor Performance Upgrade Kit V8 STAGE-1 134a

Essential Performance Compressor Upgrade Kit. This kit is engineered for your 1974-76 Firebird with factory a/c and Pontiac V8 engine. 134a

SKU: 23-611E

$725.00

Rotary Compressor & Clutch Assembly
Compressor Mount Kit designed for a stock Pontiac V8 engines with the compressor mounted on the right (passenger) side of the engine
Suction Hose (from evaporator/VIR outlet to condenser inlet)
Discharge Hose (from compressor outlet to condenser inlet)
VIR Eliminator Kit
134a Charge Port Adapter
O-ring/Oil Tube Kit
Installation Instructions

Affordable alternative to replacing individual parts.
Eliminates shaft seal leak problems associated with the stock compressor.
Simplifies conversion from the old R12 to newer 134a. (For more information on converting to 134a, click here.)
Reduce horsepower draw.
Reduce weight.
Continuous duty rating of 6,000 RPM.

Rotary Compressor & Clutch Assembly
Compressor Mount Kit designed for a stock Pontiac V8 engines with the compressor mounted on the right (passenger) side of the engine
Suction Hose (from evaporator/VIR outlet to condenser inlet)
Discharge Hose (from compressor outlet to condenser inlet)
VIR Eliminator Kit
134a Charge Port Adapter
O-ring/Oil Tube Kit
Installation Instructions

Affordable alternative to replacing individual parts.
Eliminates shaft seal leak problems associated with the stock compressor.
Simplifies conversion from the old R12 to newer 134a. (For more information on converting to 134a, click here.)
Reduce horsepower draw.
Reduce weight.
Continuous duty rating of 6,000 RPM.

WHAT ENGINES DO THE COMPRESSOR BRACKETS FIT?

This kit is designed for use with the newer 134a refrigerant. Please CLICK HERE for information on converting R12 systems to 134a
Any stock Pontiac V8 301, 326, 350, 389, 400, 455 engine with compressor mounted on passenger side (right-hand) of the engine.
PLEASE MAKE SURE THE ENGINE FITS WITHIN THE GUIDELINES LISTED ABOVE.
UNSURE? Please call or EMAIL with questions.
ENGINE BEEN MODIFIED? Please call or EMAIL with details before purchasing

CAN I INSTALL THESE PARTS MYSELF?
The average hobbyist can install without difficulty. General rule of thumb is if you change your own parts, you can change these parts.
It is recommended, however, to have the system evacuated & charged by a professional.
Other than charging the system, no other specialized tools or knowledge is required for installation of parts.

This kit is designed for use with the newer 134a refrigerant. It is important to make sure all components that are being reused (evaporator, condenser, liquid line/hose, all valves) are either changed or flushed and clean of contamination before installation and charging of the system.

Name *

Email *

Inquiry *

Product tags

72-81 Firebird A/C Condenser, High-Performance Parallel Flow